Where’s My Trident?

No automatic alt text available.

While the 2nd generation of Crye’s combat apparel was still in production there were a couple of specific variations made for certain military units. In the earlier days some sets were manufactured to the standard Army Custom cut but with AOR1 and 2 fabrics, these sets shared a few very small features in common with the very first generation uniforms and weren’t made in great numbers. I have a field shirt here that’s an example of that, it didn’t cost me too much fortunately, but if the combat shirts and trousers ever do appear for sale online (which is very rare to begin with) they can go for huge amounts of money.

Those AC sets were of course used by US Army SOF and probably some Navy, but I’m no expert in that area of gear history. What most people do think of when they see AOR patterns of course is SEALs and some other US Navy Special Warfare units. There was definitely a period around 4-6 years ago when everyone and his dog who played airsoft was trying to look like a SEAL on account of all the books and movies coming out, so the prices on any Navy Custom cut items that came up for sale went through the bloody roof. This cut of uniform and the AOR patterns have never been offered commercially of course and technically you have to have a US Government purchase order to buy them. I know that because I asked FirstSpear once out of curiosity of what the rules were. How the DoD ever really expected to control something as simple as clothing I’m not sure and the reality is there’s lots of this NC apparel in the hands of civvies all around the world at this point. AOR1 tends to command a higher value than 2, the combat pants being the most clamoured for item, followed by the combat cut shirt then the field cut sets. There are also a few NC sets multicam out there, but they seem far less common than the AOR patterned items.

It was about 2 years ago before I first went to Las Vegas that I decided I fancied having some AOR in the collection. Not because I’ve ever been in to the impression or re-enactment scene it’s just a really cool looking pattern that always comes from quality manufacturers who put out good, modern kit and that fits what I like to buy. The handy thing about physically being in the US where most of the auctions are located is you can actually be online for the end of said auctions. I like collecting gear but I’m never getting up at 3-4am GMT on a Tuesday just to avoid someone upping the bid I placed a few hours earlier by 1 dollar. I specifically remember being sat on a chilly, deserted monorail station platform one night after I’d been up to the Stratosphere for some dinner, hunched over my phone waiting for the next train while watching the last few seconds tick down on this particular combat shirt. Fortunately in 2016 the prices had dropped massively compared to 2011-12 and the auction in question hadn’t seemed to attract a lot of bidders that week, so I only had to pay a couple of notes more than a commercial Crye shirt would’ve been. Not too bad all things considered, worth it in the long term.

This sort of tale might not interest a lot of folks, but I want to say that it’s not so much just a load of money that’s needed if you want to have cool items to post about and discuss. There’s no effort or challenge involved in simply throwing a ton of cash at the first thing that comes up and being wasteful, no rewarding sense of hunting down a good deal either and I’d imagine everyone loves doing that, I know I do. Not to mention of course that if you over spend on one thing that’s money out of the budget to get other things. Personally I have an awful lot of forums and facebook groups and preset searches bookmarked in Chrome that I’m checking with great frequency (many times per day) so as to minimise the chances of missing any good bargains that crop up. Unfortunately I am classic Mr 32R/MedR and medium in almost everything in general, which means there’s a lot more competition as it were, whereas if you fit XS-long or XL-Xshort you’ll have zero trouble getting things at good prices. But honestly hunting down the things I like is as much of a hobby now as taking the photographs and then writing about them or taking them out to airsoft games (or occasionally for work with some gear).

No automatic alt text available.

So apart from the fact you need to be a member of an elite unit in the USN to ever have be issued these NC AOR items, what’s the difference between them and the AC cut that was commercially available for a good number of years? Not a whole lot in the grand scheme of things. The sleeves, yoke and collar are the usual 50/50 NYCO of course, the usual YKK coil zip, same velcro cuffs as an AC, same height of collar, pockets mostly the same too. The label would imply the torso fabric is different to that found on an AC shirt, but I don’t believe it to be correct. Initially the NC line was manufactured with an all synthetic/polyester torso, which means very fast drying but as you’ll have seen from the videos in my last post – terrible FR performance. The change over to the torso fabric was made quite early on, so if you see an NC shirt with a shiny, sports jersey/gym shirt type torso it’s an old piece and much less common. Everything about the look and feel of this particular Navy cut combat shirt suggests the torso is actually 96% cotton and 4% lycra, as per all commercial AC combat shirts. My guess would be that they printed thousands of the green labels at the start for the sake of efficiency and continued using them even when they became incorrect.

No automatic alt text available.

No automatic alt text available.

One key difference that plays in to the word Navy is the closures on the upper arm pockets. Where an AC shirt uses hook and loop, here you’ll see buttons as the primary method of securing the pocket flap. Much like the fingerprint ID on your phone, velcro is very unreliable when it’s fully sodden and water logged. The other key change is in the elbow pad pocket. Whereas the AC elbow pad is not actually contained inside a pocket of fabric and straps directly to the wearer’s arm, the NC shirt fully encloses the pad. You’ll note the pocket looks more than a bit like the one found on a G3 combat shirt, so presumably Crye found the setup to work better and carried the feature over from the NC to all G3s that we see today. They certainly didn’t copy the elbow pocket from the G2/AC field shirt as that is a different shape with top loading for the pad rather than the opening being down near the wrist.

Between the NC and AC combat trousers I only know of the differences in pocket closures, buttons vs pure velcro. But if I ever find a pair in AOR2, in my size and good condition for a good price, I’ll likely be tempted to pick them up and talk about them. Odds are slim of those planets aligning though.

NSW moved on from the NC some years ago of course as Crye discontinued manufacture of the 2nd gen uniforms, so Patagonia L9 sets and G3s (Crye and Drifire) in the AOR patterns were issued. Whether they still frequently use AOR1 and 2 I don’t know exactly because I don’t keep up to date on that stuff, but they’ve certainly worn them for long enough now that substantial amounts have leaked their way out of the Navy.

Potomac FR UCP Shirt

One last piece of UCP to complete the set before we move on to greener pastures… literally. I’m working through a few older photos still (down to around 22 months backlog right now) where I didn’t quite get pictorial for all the features on every item, but please bear with me over the next 11 days up until SHOT. Either directly or shortly after all the content is posted from there, I’ll be getting in to pictures with better backgrounds, better lighting, just better composition all around with more photos per piece of kit. I’ve got zero training or education in photography or media of any kind and the most base model DSLR Canon made. From the point I took shots of my first AEG back in 06 up until now it’s been a continual process of 100% pure trial and error to attempt to up my standards and bring half decent images to accompany all the posts.

So I hit the question of a good combat shirt to accompany the Crye test item/prototype Army combat pants. The US Army combat shirt of the period sells extremely cheaply online, so it’s a solid choice for someone looking to get a good quality upper torso garment to use in any activity where a plate carrier might be appropriate/desirable. You even get full FR construction at a bargain price. Problem is those Massif combat shirts *always* smell weird no matter how many times you wash them and lack both a zip and a proper collar. I’ve had too much neck ache on my delicate airman skin from narrow slings and straps on various gear over the years to go back to any sort of shirt without a decent collar, so that meant the ACS was out.

Since I was only ever going to have one UCP shirt in the collection, I also had to pick something that would be different and interesting enough to be worth featuring here. A generally high standard of construction quality is also a given of course, especially in a ‘dead’ pattern that won’t be in production much longer, if they’ve not stopped printing fabric it already that is. Problem is the options are limited in this pattern. I wasn’t going to try and hunt down and drop the big bucks on a rare Crye shirt in a pattern that’s not amongst my favourites, certainly if I didn’t have the set with the trousers. Tru-Spec do/did a reasonable option and I still recommend their combat shirts for an economical choice, it’s just a very common brand that again I don’t find personally interesting. That left (in the realm of well made options) the Potomac Field Gear below and one other shirt I have seen on ebay that’s a similar cut, but I can’t recall the brand for the life of me. So when the Potomac came up for not much money, that’s what I settled on, particularly given the RRP. Passive Shooter also picked one up years ago in US Woodland when combat shirts in said pattern were a lot scarcer than they are these days, so I’d seen the design and the construction quality already.

No automatic alt text available.

The really stand-out unusual feature about the Potomac ‘Advanced combat shirt Gen 2’ is the amount of padding you can fit inside it. The UF-Pro Striker XT that I’m a big fan of accepts some 3D spacer mesh on top of the shoulders, but the Potomac has pockets for 2 pads on the chest, one right across the back and 2 in the shoulders. They’re thickly made too so if you wear the whole lot you really look like a lego man that’s lifted a ton of weights.

https://store.potomacfieldgear.com/…/comersus_listCategorie…

Needing 2 layers of fabric to contain these pads around the upper part of the torso isn’t ideal for heat or sweat dissipation and the 1/2 length vislon zip is frankly too long and chunky for optimal wear under armour. Then again if you had all the pads in the front the zip wouldn’t be pressed against the sternum as much as you would normally expect.

The construction is full FR, which fits my OCD nicely as it means I have a complete set of FR UCP. The sleeve fabric is proprietary to Potomac, though I can’t comment on durability or performance. However I would strongly encourage every single one of you to watch the following 2 videos. They’re not just about this shirt, but I found them many years ago when first looking in to this garment and they opened my eyes like never before to the difference FR fabrics will make in the event anyone might actually be caught in a blast.

https://youtu.be/sEn0HbnKrHs?t=1m9s

https://www.youtube.com/watch?v=R5dKqfqOfPo&ab_

I got in hot water during my brief stint in the sandy place for not wearing standard MTP and sticking in a Multicam US Army combat shirt and combat pants when I had to leave base, but I’ll take a telling off over risking polyester melted to my skin any single day of the week, regardless how tiny the risk may be in my job. I’ve scrounged up aircrew FR MTP since then to negate the issue when I next deploy. Throughout the ‘bulk’ phase of the coalition deployments in Iraq and Afghanistan burns constituted a serious proportion of our casualties, unfortunately in the air force the civilian mindset is pervasive and being as well prepared as possible is mocked and derided rather than encouraged. I’m not one for living my everyday life in fear, far from it, but I’ll do everything I can to be as well kitted out as I can be if I’m going to unpleasant and unruly parts of the world where westerners are targets.

No automatic alt text available.

Now as you’ll note the right arm loop fields are in the US Army issued pattern, I believe there’s one area for a flag, one for rank and one for unit/name, but I sent my shirt off (along with some velcro brand grey loop) to an individual who used to do some nice mods for tactical apparel. He did a good job in the end, sadly it took well over 6 months when I was promised only 6 weeks. Payment was made right at the start of course and comms were spotty from then on with a whole lot of broken promises. Those of you who’ve followed me for a while will know I had a similar issue previously with a GBB tech and I’ve even had extensive delays recently with a different airsoft technical service who I’ve used many many times in the past with no issue. So while I’m pleased with the end result as it fits me personal preferences, I’m certainly getting more and more wary of anyone here in the UK who does any work on military uniforms or replica guns. Any time I find someone who actually is reliable they’ll be getting a great deal of business and positive press from me that’s for certain.

Overall, it would get more likes on the gram if it was Crye and I’ve no idea if these shirts were ever issued, but I enjoy having this piece in the collection since it’s of a high quality in construction. Though may not be the perfect choice it ticks most of the right boxes and exhibits some unusual but interesting features in the design. It’s a snapshot of the time period when it was made, put it that way.

UCP ACP with a little G3

Everything gets cool again once it’s old and long out of production. You may think “eww, UCP” right now but give it long enough and it’ll be cool on social media again. Apart from anything else, despite the U in UCP being entirely wrong, the pattern consists of a variety of greys in a proven pixel arrangement. So in any environment where the flavour-of-the-month Wolf/Manatee/Frost grey might work, UCP would also be just fine, possibly better in some respects. Just don’t wear it in the lush green woodlands or bright sandy desert.

No automatic alt text available.

No automatic alt text available.

I’m not a historian in terms of which military unit or organisation wore which items and during what time period, that’s not my kind of bag at all. What I have gathered is that these initial versions of the US Army Combat Pant in UCP were made by Crye (or perhaps a sub contractor) around 2009-10 then worn and tested by members of an airborne infantry unit who deployed with them to Afghanistan around 2010 or 11. The one article I could find online is here at Soldier Systems Daily:

http://soldiersystems.net/…/08/11/commercial-army-combat-p…/

I don’t have comparative pictures right now of these trousers next to the multicam version that was later adopted in larger numbers when MC became the camo for US Army/Air Force deploying to Afghan (while still wearing UCP at home), but suffice to say the multicam version is very close in terms of cut and features. They did away with the front thigh pockets and went from velcro closures to tons of buttons of the inferior 4-hole type that US uniform always feature, along with other small changes that moved the pant further from the G3 design, but fortunately the integrated Airflex knee pads stayed, which is perhaps the key feature:

https://i.pinimg.com/…/53/aa335315bd8061f183beae28ba8d6552.…

Crye themselves did make some proper AC/Gen 2 combat sets in UCP for certain SF guys, but they’re so rare they go for anything from $500-700+ on the used market for just the lower halves. While I do have some uncommon Crye items that were expensive to obtain, I don’t like UCP nearly enough to spend that money and these trousers in slightly worn condition cost a a bit under $50. I also find them a bit more interesting since I already own a couple of pairs of AC trousers in the more common colourways and it’s nice to have some kit that’s of the more widely issued variety, also that marks an important step in development of a garment that went on to produced in large quantities.

No automatic alt text available.

No automatic alt text available.

As you’ll see by the label the trouser is flame resistant, though the weirdest thing about them is the fabric used behind the knee pads and in the groin gusset. It’s different from the rest of the piece, doesn’t exhibit any rip-stop grid pattern and should be stretchy just like Crye combat trousers; but it simply isn’t, it’s static.
Why they even bothered to put in these separate panels I’m not sure, but it smacks of military decision makers making decisions about things they don’t understand in even the slightest little bit. Could just be someone ordered the wrong material of course, either way it’s pretty damn pointless.

All the pockets that a G3 trouser would have are present, though constructed slightly differently. Also present are the waist adjustment tabs, bungee cord for knee pad height adjustment in the front pockets as you would expect and velcro knee/ankle cuff adjustments. Though the waist line is not padded and the fly exhibits buttons instead of a zip and velcro.

I’ve been remiss in not posting a shot of the G3/Airflex knee pads that were exclusively issued with these combat pants, as while they were made exactly like any other Airflex pad shape wise, they were moulded in a Foliage Green colouration that’s never been sold commercially. To my knowledge these FG pads are the 2nd least common type of Gen 3 combat knee pad after those made in Wolf. They’ll be pictured here at a later date however.

Pouch Catch Up

A little while back I discussed modular placards, then more recently what I like in a plate carrier – to include mounting those placards. But which is the best type of placard or modular panel?

Given how many people would attach triple mag pouches to their conventionally styled PALS-fronted PCs and chest rigs, a removable panel that does the same as said pouches is going to be a solid and popular option. But which is the ‘best’ PALS pouch of the gazillions out there and how do you integrate that in to the QASM+velcro panel set up?

A hugely subjective question of course and most pouches sit on a scale of maximum speed at one end with maximal retention at the other. As with clothing some items manage to do a bit of both and stray from the line in a positive way, some stray from it in a negative fashion though too. Assuming we’re discussing the truly ubiquitous 30rnd 5.56×45 mag, my belief for the past couple of years has been that the simple open topped pouch with a kydex insert is the best all around option for a majority of applications. Add in shingle bungees or a stowable flap and you’ve got the best pouch going for 95% or more of situations.

ESSTAC have been making pouches specifically designed for their own KYWI (kydex wedge inserts) for a very long time, although they only really caught on properly in 2017 and ESSTAC themselves now even offer a Vel Sys mounting spec placard that features 3 slots for 556 mags to be retained with the KYWIs.

When I got my first plate carrier that could accept a placard however, ESSTAC weren’t making those products, but Haley Strategic Partners had released the MP2 plastic pouch inserts and seeing the similarities to the KYWIs I’d already tried, I decided the MP2 would be the way forward. So back in August 2015 I commissioned the pictured nylon panels from Dead Coyote Tactical Nylon after furnishing him with some MP2s to work from.

No automatic alt text available.

Each pouch on the panel is of course built just like the ‘guts’ of a D3CR, because the MP2s are designed to work in the D3CR. The pockets did turn out slightly too deep, but with a few pennies worth of high density foam dropped in this was remedied. Firmly inserting a mag can still cause the ears of the plastic to disengage the webbing retention strip, however this is in large part a problem with the MP2s as the cut in the top centre could really do with being deeper; currently it is only sits at about 4-5mm which needs extending to my mind. All that said however the MP2s stay pretty firmly where they belong even if the top tabs are disengaged and it would take some serious jostling to lose the inset and/or your mag. We’re talking parachute opening type deceleration and for anyone who’s done any freefall you’ll know pulling that handle once you reach terminal velocity is like being clothes-lined by metal barrier when running at full sprint.

No automatic alt text available.

Depth issues aside, DCTN did a superb job of setting the width of the opening to each cell, as the area within which the MP2 has room to expand directly affects the level of retention it provides. If the cordura causes the two sides of the plastic to clam too tightly together you’ll never get mags in or out. Conversely, leave the plastic open too wide and magazines will wobble around all over and potentially bounce/fall right out.

A pouch that’s built to the right dimensions will allow rapid and entirely unobstructed access to magazines when needed, yet will also retain those magazines quite reliably under the majority of circumstances. With the simple addition of a small loop of 1/2″ webbing on the front of the pouch, bungee cord and a retention tab could be routed through said loop and the webbing holding in the MP2, making the setup viable for flying around in things and jumping out of flying things.

The funny thing about all this is that Haley Strategic already teased their 3-mag variants of the original D3CR chest rig they’ve been selling for years that holds 4 mags. The new 3 cell version will work as a placard like the Spiritus rig does now and though there will probably be small pouches mounted on the front of the rifle mag cells, said cells will no doubt be built just like what you’re seeing in these images that I took in March 2016.

It takes way longer for a big company to design, develop, test, re-design, re-test then manufacture and bring a product to makes en masse of course.

Old Man Crye G3

I honestly can’t remember exactly which year Crye released their 3rd Generation of combat clothing and I should do because I asked for some 2nd Generation combat trousers one Christmas back when those were still very much being commercially sold, but either way it was around 6-7 years ago that the change was made and the earliest review I’ve found in a quick google is from militarymorons.com back in 2011. So the 11 time frame is about right since MM has a long history of jumping right on the best new gear right away and putting out info.
 
I’m sticking with my prediction that the G4 uniform is going to be shown at SHOT in a couple of weeks time, but honestly, if it isn’t I will be almost relieved in a way as that’s one less thing on my ironic list of ‘needs’. If it is there however, rest assured I will be all over that. The crowds at the booth will no doubt be deep, but I will keep going back there multiple times a day until I get the shots and the info.
 
As far as the now infamous G3 Combat shirt goes, there’s nothing I can do in terms of describing the construction and materials that hasn’t been long done already, so I’ll link this very detailed piece from my buddy Rich over at The Reptile House instead:
 
https://thereptilehouseblog.com/2014/03/19/crye-g3-combat-shirt/
No automatic alt text available.
 
In the realms of the NYCO combat shirt however, the G3, despite it’s reputation, is long in the tooth design wise. It’s also a jack of all trades and master of none. Tyr Tac and Arc’teryx now have combat shirts for example using fabrics specifically designed to be lighter, more breathable and faster drying than your average NYCO – suited to extremely hot weather and jungle usage. At the other end Arc’teryx, Drifire, Platatac and others have shirts in a fully flame retardant construction. While the Crye is fairly good in hot weather and has an FR torso R(but not sleeves), it doesn’t excel in either area. It’s a good option for the sort of people that Crye design clothing for, but it’s certainly not the best for any given usage that somebody might have for a shirt that is cut specifically to go under body armour. It’s neither ideal for the civilian user, or the military man/woman who needs the best protection against explosions and any other flash fire hazards.
 
Rich also sums up a lot of thoughts I share in the start of this piece covering the Arc’teryx Assault Shirt AR, which for me is the next, more modern step in terms of a NYCO combat shirt that fits my criteria for using in hobbies and games like airsoft:
 
https://thereptilehouseblog.com/2016/07/15/review-arcteryx-leaf-assault-shirt-crocodile/
 
I’m also going to perhaps illicit some firm reactions when I say that comparatively (and please add huge emphasis to that word) the Crye G3 is one of the cheaper shirts sold commercially that the end user may consider for serious duty use. All of the shirts offering equivalent NYCO fabrics from Beyond, Tyr Tac, Arc’teryx, Patagonia (if you can get one) all charge even higher prices. In some cases a lot higher. Hell even 5.11 make a couple of combat shirts that cost more than Crye and anyone who buys those and admits it to me will receive a strongly worded letter let me assure you.
 
Fortunately of course there’s still plenty of solid mil surplus kit and mid range options that offer either NYCO or full FR construction, but amongst the high end manufacturers who contract to SF but also sell commercially, Crye is still one of the cheaper brands. Far as I know their commercial pricings have never actually changed in the entire time the G3s have been sold to the public, which makes them actually quite a lot better value in 2018 when you take inflation and increases in manufacturing costs in to account.
 
That all said, despite Multicam being by far the most common Crye colour way found on the second hand market, there are also many brands at both higher and lower price points who beat the G3 shirt in various ways and also offer original Multicam. So personally I would tend to only recommend the G3 shirt if you want the best combat shirt available in MC Tropic, Arid or Black. If you want the best in RG, Black, Tan/Khaki or regular MC then other companies mentioned do make a better shirt if you wish to spend more.
 
So there’s a lot of considerations to weigh up in a combat shirt. Despite its’ popularity, I really despise the G3 for having the split velcro and plan on having someone who’s good with a sewing machine make something that will fix that for me. It is a good option in various ways and of course the quality is there, but then again it’s really not the best option in a lot of other ways. As I very often say, the end user must learn what they need to learn in order to make the best decision about the materials, features and patterns that will bets suit their uses, then narrow down manufacturers based on that information and shop around from there. If gucci looks are the aim then sure, stick with what’s popular online and gets likes on social media, but never be drawn in to thinking popularity guarantees the best results for you personally.

Crowd Funding

After a LOT of deliberation (good couple of years at this point) I’ve decided to break my silence as it were as far as Patreon is concerned. This is something I’ve well and truly been on the fence about for a long old time, for a couple of reasons. First off I try to keep the recurring monthly costs leaving my bank account absolutely minimal, because it’s too easy to let those ‘small’ amounts stack up and hinder me in terms of acquiring the things I really want – I’d much rather regularly squirrel money in to a savings account myself of my own accord. Secondly because there are an absolute ton of people out there with patreon accounts and deciding which ones to support has been very tricky for me indeed. There are dozens and dozens of creators out there who I like, a couple of them I’m lucky enough to meet and/or talk with now and then, and if I was superbly rich and could buy everything I wanted to post about myself without any concern I’d buy in to the top tier for every one of those people’s Patreon pages. This is the real world however.

At this time, I’ve opted to support Forgotten Weapons and Kit Badger. Two websites/YouTube channels which inhabit a similar-ish firearms realm, but one with a well established following and one that is comparatively new. My primary reasoning for these decisions is quite simple, it’s about the amount of knowledge I’m gaining from a given channel or site. There are many, many other content creators out there whose articles, videos and images I enjoy immensely and many I learn from as well, but overall the 2 mentioned are doing what I assess to be the best jobs in terms of teaching me the things I really want to learn. Of course there are also other factors and my belief is both Ian and Ivan are down-to-earth, decent members of the human race who firmly believe in integrity. I believe they’re also people who want to impart knowledge for the benefit of others, rather than merely becoming internet famous and I don’t support people who I think engage in that.

I hope and would like to think many of you reading this are here because you’re learning things (as I do every day) and because you want to understand gear, firearms and other related topics. Obviously there’s some posts that are purely for the hell of it mixed in there because nobody ever learned anything from a plaid combat shirt, but all work and no play makes jack a dull boy.

I’ve been subscribed to the Forgotten Weapons’ channel for many years now. I found it a long time ago based on a thumbnail that popped up for a video detailing an extremely unusual black power based light weapon that featured multiple chambers allowing for multiple shots in rapid succession, something that was of course quite rare for the time period. I’d seen an example of the same type of gun myself at the National Firearms Centre attached to the Royal Armouries in Leeds and at that time it was my first experience of any black powder-era gun that could actually fire more than one shot without reloading, previously I’d honestly believed no such thing ever existed.

Ivan over at Kit Bager looks at firearms through a more modern lens of hunting, recreation and personal protection. He showcases exactly the sorts of weapons and related activities I’d like to do but am either entirely barred from partaking in, or would have to go to really great lengths to partake in. He’s also former military (and civilian contractor) and an avid outdoorsman who reviews all sorts of outdoor and tactical gear from a perspective of both experience and grounded common sense. His videos also look that good that Soldier Systems Daily features them fairly often and I am glad of that in particular.

Now sometimes I do question Patreon purely in the same sense as I do YouTube, because most of these large companies are very much afraid of being painted with a brush of over-reaction by certain elements in the media. It was radical, extremist and terrorist related content that caused YouTube to lose tons of ad revenue and all type of channels lost out because of that. However based on an aggregate of a lot of different articles created by people who know, policies of demonisation have particularly hit channels related to firearms; not to mention those covering other things like knives, airsoft and anything similar that’s bad and evil and upsets people for no logical reason. So my concern is that the same thing could happen to Patreon and from what I know it did already happened to KickStarter a long time back; and I would call KickStarter Patreon in reverse.

However as things stand Patreon seems fairly neutral and sensible in its’ policies. I don’t think anyone ‘needs’ to support any creators they follow in a monetary fashion because those channels and blogs can always put up a paywall if they so choose. My stance is that it’s worth considering who you really learn from or enjoy the most, then maybe chipping in if it is appropriate. That helps to support the people you personally deem most worthy of that support in order that they keep creating the content you want to see.

Personally of course I don’t have a Patreon page, I used to make a small amount of money from YouTube, around £100-150 every 6 months very roughly, but that’s all gone now on account of the decreased amount of ad money available and the fact various work issues meant I had to take a fair break from really putting up any videos. I don’t think the patron based funding thing is ever going to be right to me because I don’t have a really nailed down schedule of regularity for publishing content. This is just a hobby for me personally and it might spoil my enjoyment of it if it became about making any money instead of just doing it because I like it. But if the ‘follower’ numbers were to somehow magically increase drastically in a few years the system I’d employ would be along these lines:

-All funds received each month go in to a pot that builds up
-Once said pot reaches an appropriate amount, I’d open up a post to any and all suggestions from the patrons on which gear items they want to see reviewed
-Once the money is there (or if close I’d add in some of my own) a specific vote based on the most popular suggestions from the earlier input would be undertaken
-The winning piece of kit from said vote is purchased, tried/tested and a review post on the blog or video uploaded
-That item is then given away to a patron

To me, running that as a cycle would make by far the most sense given that I’m not somebody doing this as my actual job and I genuinely don’t even have the storage space to keep the gear that was purchased.

Let me know what you all think of this particular subject and your feelings on any and all of the points raised above. I’m just one person and I appreciate perspectives other than my own coming in.

Glock 19X Reveal

Just seen the new GLOCK​ 19X.

No automatic alt text available.

It’s a 19 length slide/barrel, with 17 size frame/mag. Which frankly I find odd because the US concealed carry market want thin, short mags for best concealment whereas barrel length is a secondary priority (to everyone I know over there at least). So this gun is the opposite in that regard.

Looks like a Gen 5.X gun too. At a cursory initial glance without knowing all the details I can see the cut at the front of the mag housing has done a 180 and turned in to a slight extension and the previously squared off front of the frame now has angles in keeping with the Gen 5 slide. Seems they’ve already looked at some of the primary criticisms of the Gen 5 design.

I’ll be interested to see what some of the American folks who have a lot of pistol experience end up saying once these begin to circulate on the market and YouTube gun channels (looking at you Military Arms Channel​).

NY Mail Call

Roses are red,
Violets are blue,
Here’s a bunch of kit.

No automatic alt text available.

ft. CamelBak Tactical, Crye Precision (Khaki from Airsoft Evike.com), Arc’teryx LEAF (Wolf from Edgar Brothers/Edgar Brothers Shop),DRIFIREALG DefenseUF PRO from Polenar TacticalGrey Ghost,Obliterator Industries Ltd from ehobbyasia.comFlimmuur Tactical,Magpul Industries Corp.PTSRoman KurmazFRV Tailoring,Patagonia and Griffon Industries with some MultiCam and PenCott Camouflage.

People do seem to enjoy these types of posts, but of course over time everything here will be individually featured on the blog/FB and IG with more detailed images and descriptions, or reviews where appropriate.

Leave is for Gaming

If you’re looking for “Big stuff coming in 2018!” this is not where you’ll any of that. Hell the way the weather is going right now I’d not be surprised if it snows a shit ton the day I’m meant to fly to Vegas and my whole carefully planned SHOT trip is royally buggered.

If you follow me on IG in order to see the ‘stories’ you’ll see I’ve spent genuinely the entirety of 2 days before today building Ikea flat packs (which I now despise with a passion) just so I can have more room to store kit. About as far from glamorous as it gets. But necessary if I want to carry on building the collection. Spent all this afternoon laying out the next mail call post picture; got bloody lucky as just as I brought the camera inside (after all the kit) it hammered down hail as I stepped through the door

Minor break from the gear to discuss what I’m playing at the moment – I am only on PC but then these days the majority of titles get released out on most or all platforms.

Recently finished a campaign in Medieval 2 Totalwar which I’d had going on and off for maybe a year at a guess. For those unfamiliar, TW is like Risk/Civilisation, but when the pieces meet on the board you zoom in to a real time battle with access to just the units in that army. Medieval 2 was the 4th entry in the series, the first 3 using a really old school graphics engine with a lot of 2D (yep) troops in the tactical battles. In Med 2 you’ve got all of Europe, most of Russia, North Africa and modern day Syria plus parts of Iraq and a few other countries in that region to primarily fight over. An awful lot like both World Wars in many ways, even the nations involved are essentially the same ones with a lot of clashes through France. It’s also heavily based on Religion and the crusades on a strategic level, with Catholic Europe squaring off against Orthodox Russia and the Islamic middle east, as if there weren’t enough modern parallels already. Funnily enough I played Empire TW about 8 years ago and that starts off right where Med 2 finishes, with every nation fielding rudimentary firearms while melee warfare and bows fade away.

The screen cap is my faction leader (King of England) with his army of shinily armoured’ knights and their polished helmets swatting down the final bastion of rebel hold out that was left over after I finally had beaten the Mongol hordes.

No automatic alt text available.

In between gradually conquering the world map in TW, I’ve been dipping in to Battlefield 1, primarily when a new DLC comes out of course. It’s the most mainstream series I play these days, but I started my time in BF by pre-ordering the 2 CD-ROM box of 1942 in a GAME store. Missed Vietnam, played BF2 massively, quite a lot of BF3 and BC2, bought the fancy edition of BF4 with the season pass and blimey was I disappointed. Nothing but pink tanks rolling around everywhere with marijuana leaves on the sides to cater to shit bag kids who scream at their weak willed parents until said parents cave and buy them the collector’s edition of this year’s CoD. I know the WW1 setting is somewhat divisive, but as someone who finds a lot of modern weapon really boring at this point (they’re just too easy to use and efficient), playing this Battlefield during the centenary of the war and learning about a lot of the guns in Forgotten Weapons videos as I go – very enjoyable indeed.

Right now I’m hugely surprised by how hooked I am on Child of Light. It’s one of those games Ubisoft does so, so much better than the turd Assassin’s Creed has become. The trailers for it make it seem like some sort of relaxation software, or a game only aimed at young girls. Reality is it’s more like a moving piece of art with truly amazing music, great painted-style visuals and all the dialog is written poetry; good poetry too. There’s Rayman-light type movement around the world with Final Fantasy/Stick of Truth RPG combat all reliant on timing and it is far harder to get right than you’d think based on the aesthetics of the game. In a similar vein and also looping back to WW1, be sure to check out Valiant Hearts: The Great War which is another Ubisoft 2D platfomer with lots of puzzles, no actual combat per se, just a truly amazing story of some real heroes who went through literal hell between 1914 and 18. It may be presented in a fashion that can look like Wacky Races-inspired childish cartoons, but the stories going on with the characters are incredibly deep and involving and draw you in like nothing else. I choked right up at the end of it and if you play it you’ll see why, superb tellings of heart wrenching tales of horrors 99% can’t even imagine.

Last recommendation based on a recent play through is Transistor, which is another RPG though isometic this time, with somewhat timing/turn based combat. It drops you right in at the deep end in to a very unique sci-fi sort of world (which is impressive enough as it is) and you have to learn what the hell’s going on as you play. No handy intro cinematic, the veils are slowly lifted as you progress. Tragic ending of course, as with a large proportion of the best games. However yet again great characters, as is they key to giving a damn about the story in any game, film, book or TV show.